BMP-4000

BMP-4000 Ride On Milling and Sawing

Introducing the Diamatic BMP-4000, the only ride-on milling machine which can also be used as a sawing machine.  With the possibility to remove up to 2.5 inches of surface material in several passes, you are sure to save time on large milling projects. Featuring an electric measuring system with digital readout display which gives information about height adjustment and other critical machine operations.

• Comfortable to use, easy to move, low vibrations
• Fits through most door openings due to the unbelievable narrow width of only 33 inches
• Completely sealed drum housing
• Very Fine sawing pattern, which can be adjusted by adding more spacers and less blades to drum
• Optional soot filter for diesel engine to work safely and cleanly indoors
• Paired with the BDC-99

SPECIFICATIONS:

Working Width:  Milling 15.75in. / Sawing 15in.
Motor Power (Electric): 30kW / 400v 50Hz 3phase
Motor Power (Diesel): 34kW / 3 cylinder diesel
Working Speed: 0-150 ft/min
Weight: 3417 lbs
Dimensions L / W / H inches: 78.5 / 33 / 61 (59.5 inches wide with wheels folded out)
Drive System / Speed: Hydraulic / 0-2 mph
Push / Pull machine: Ride-on
Surface: Concrete / Stone / Asphalt

Operating Manual

OPTIONS / ACCESSORIES

• Milling Drum – Empty
• Milling Picks (Concrete)
• Milling Picks (Asphalt)
• Drum Changing Set (Complete)
• Sawing Drum – Empty
• Blades 15.75 in. Green
• Spacer Ring 2.5 mm
• Spacer Ring 4.0 mm
• Suction Hose 60 ft.
• Soot Filter for Diesel
• Personal Safety Features